ECM/PCM Power Input Signal Low
The DURAMAX-P2507 (Duramax) diesel fault code means: ECM/PCM Power Input Signal Low. This is a moderate severity code.
- Keep driving?
- Yes, with caution
- DIY difficulty
- intermediate
Down with a Duramax fault on the road?
We are building a network of verified mobile diesel and reefer technicians along the freight corridor. It is not live yet — no one can be dispatched to you today. You can see where the pilot is launching and register interest.
View pilot availability →A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Affiliate links — we earn a commission at no extra cost to you.
What Are the Symptoms of DURAMAX-P2507?
- Check Engine Light on
- Possible stalling, no start or intermittent electrical faults
What Causes DURAMAX-P2507? (Most Likely First)
- Weak batteries or poor charging High
- Loose or corroded battery, ground or fuse connections High
- Damaged power feed wiring to the engine computer Moderate
Can I Still Drive with DURAMAX-P2507?
Yes, with caution. DURAMAX-P2507 is rated moderate severity. Keep trips short and get it diagnosed soon rather than waiting for symptoms to worsen.
Frequently Asked Questions
What does P2507 mean on a Duramax?
P2507 means ECM/PCM Power Input Signal Low. The engine computer is seeing its power input signal below its normal range.
Is P2507 a Duramax-specific code?
No. P2507 is a generic OBD-II code defined by SAE J2012, so it means the same thing on any vehicle that sets it. The exact conditions GM uses to set it on its diesels are in GM service information.
Mechanics Guide Step-by-step diagnosis
How Do You Diagnose DURAMAX-P2507?
Test the batteries and charging voltage.
Clean and tighten battery and ground connections and check the engine computer fuses.
Check voltage at the engine computer power input against battery voltage.
Sources 1
This page is built from documented references. Verify against your own service info before repair work.
- SAE J2012Diagnostic Trouble Code Definitions (defines P2507 as a generic OBD-II code)
P2507 on Other Platforms
The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown:
Explore More
Was this helpful?
Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.