P2507 critical

ECM/PCM Power Input Signal Low

The P2507 code means the vehicle's onboard diagnostic system has detected: ECM/PCM Power Input Signal Low. This is a critical severity code.

My Garage →
Keep driving?
No — stop driving
DIY difficulty
hard
Estimated cost
$100 - $1500 (parts and labor)
ANCEL AD310 OBD-II Scanner
Recommended Tool
ANCEL AD310 OBD-II Scanner

Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.

Check Price on Amazon
AstroAI Digital Multimeter
Every Tech Needs This
AstroAI Digital Multimeter

Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.

Check Price on Amazon

Affiliate links — we earn a commission at no extra cost to you.

Common Symptoms

  • Engine will not start
  • No scan tool communication with ECM
  • All dashboard warning lights on
  • Electrical accessories not functioning

Probable Causes (Ranked by Likelihood)

  • Blown ECM main power fuse Very High
  • Failed ECM power relay High
  • Open circuit in ECM power supply wiring Moderate
  • ECM internal power supply failure Low

Frequently Asked Questions

Why won't my scan tool connect with P2507?

The ECM has low or no power input. Without power it cannot communicate with diagnostic tools.

Could a simple fuse cause a no-start?

Yes. A blown ECM power fuse completely disables the engine control module. Always check fuses first.

How do I know if my ECM has failed internally?

If all external components test good and the ECM still has no power, internal failure is likely requiring ECM replacement.

Mechanics Guide Step-by-step diagnosis

Step-by-Step Diagnostic Procedure

  1. Check ECM main power fuse and all related fuses

  2. Test ECM power relay with multimeter

  3. Measure voltage at ECM power input pins

  4. Verify ignition switch signal reaching ECM

Sources 1

This page is built from documented references. Verify against your own service info before repair work.

  • SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)

P2507 on Diesel, EV & Equipment

The same code ID appears across other engines and platforms. The diagnostic flow varies by manufacturer — these are the platform-specific breakdowns:

Commonly Affected Vehicles

  • 2010-2020 Toyota RAV4
  • 2012-2019 Honda Civic
  • 2008-2018 Ford Focus
  • 2011-2020 Chevrolet Cruze

Related Codes

Explore More

Was this helpful?

Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.