Invalid Data Received From Digital Disc Player/Changer Module "D"
The U0491 code means the vehicle's onboard diagnostic system has detected: Invalid Data Received From Digital Disc Player/Changer Module "D". This is a moderate severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- moderate
- Estimated cost
- $50 - $500 (usually the fault behind the bad data, not the network itself)
Network codes mean modules are not communicating. You need a scanner that reads all systems to find the problem.
Affiliate links — we earn a commission at no extra cost to you.
Common Symptoms
- Check Engine or related warning light on
- Functions relying on data from the Digital Disc Player/Changer Module "D" may act erratically
- Often intermittent
Probable Causes (Ranked by Likelihood)
- The Digital Disc Player/Changer Module "D" is transmitting, but its data is implausible - often a failing sensor feeding it High
- Intermittent wiring fault corrupting messages Moderate
- Software mismatch after service Moderate
- Failing Digital Disc Player/Changer Module "D" Low
Frequently Asked Questions
What does U0491 mean?
U0491 means this module IS communicating with the Digital Disc Player/Changer Module "D", but the data it sends fails plausibility checks. Diagnose the source module first.
Can I keep driving with U0491?
Usually yes for a short period. The affected function may be degraded, and intermittent wiring faults tend to worsen - diagnose soon.
Should I replace the module for U0491?
Not first. Most communication codes are power, ground, fuse, or wiring problems. Replace the module only after those test good - modules are expensive and often require programming.
Mechanics Guide Step-by-step diagnosis
Step-by-Step Diagnostic Procedure
-
Scan the Digital Disc Player/Changer Module "D" itself - the invalid data usually traces to a fault code stored there.
-
Fix any codes in the source module first; this code often clears with them.
-
Check for recent programming or battery-disconnect events.
-
If the source module is clean, monitor the specific data value flagged and follow the OEM pinpoint test.
Sources 1
This page is built from documented references. Verify against your own service info before repair work.
- SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)
Commonly Affected Vehicles
- All OBD-II vehicles - network (U) codes are standardized across makes
Related Codes
Explore More
Was this helpful?
Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.