P2797 moderate

Auxiliary Transmission Fluid Pump Motor Control Circuit Low

The P2797 code means the vehicle's onboard diagnostic system has detected: Auxiliary Transmission Fluid Pump Motor Control Circuit Low. This is a moderate severity code.

My Garage →
Keep driving?
Short distances only
DIY difficulty
Advanced
Estimated cost
$400 - $1,200 (pump motor replacement)
ANCEL AD310 OBD-II Scanner
Check Your Fluid First
ANCEL AD310 OBD-II Scanner

Read and clear transmission codes. Many trans codes are caused by low or burnt fluid -- check level and color before assuming the worst.

Check Price on Amazon
LAUNCH CRP123X (Reads All Systems)
Read Transmission Codes
LAUNCH CRP123X (Reads All Systems)

Basic scanners only read engine codes. This reads transmission, ABS, and airbag too.

Check Price on Amazon

Affiliate links — we earn a commission at no extra cost to you.

Common Symptoms

  • Check Engine Light illuminated
  • Transmission overheating at idle or low speeds
  • Harsh shifting after extended idle periods
  • Delayed engagement when starting from stop
  • Transmission fluid temperature warning

Probable Causes (Ranked by Likelihood)

  • Failed auxiliary transmission fluid pump motor High
  • Wiring fault in pump motor circuit High
  • Pump motor relay or fuse failure Medium
  • Auxiliary pump internal mechanical failure Medium
  • TCM driver circuit failure Low

Frequently Asked Questions

What does P2797 mean?

P2797 indicates: auxiliary transmission fluid pump motor control circuit low. This code is set by the transmission control module when it detects an issue with this specific circuit or component.

Can I drive with P2797?

Yes, short distances are acceptable. The vehicle may be drivable but schedule repair promptly.

How much does it cost to fix P2797?

Estimated repair costs are $400 - $1,200. The specific cost depends on whether the fix involves a sensor replacement, wiring repair, or more extensive transmission work.

Mechanics Guide Step-by-step diagnosis

Step-by-Step Diagnostic Procedure

  1. Scan for codes and confirm P2797 with freeze frame data

  2. Check transmission fluid level and condition

  3. Inspect wiring and connectors for the affected circuit

  4. Test the specific sensor or actuator identified in the code description

  5. Check for related technical service bulletins for your vehicle

Sources 1

This page is built from documented references. Verify against your own service info before repair work.

  • SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)

Commonly Affected Vehicles

  • 2012-2020 Ford F-150 10R80 10-Speed Auto
  • 2014-2022 Chevrolet Silverado 10L80 10-Speed Auto
  • 2011-2019 Ram 1500 8HP70 8-Speed Auto
  • 2015-2021 Jeep Grand Cherokee 8HP70 8-Speed Auto
  • 2013-2021 BMW X5 ZF 8HP 8-Speed Auto

Related Codes

Explore More

Was this helpful?

Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.