P0726 critical

Engine Speed Input Circuit Range/Performance

The P0726 code means the vehicle's onboard diagnostic system has detected: Engine Speed Input Circuit Range/Performance. This is a critical severity code.

My Garage →
Keep driving?
Short distances only
DIY difficulty
hard
Estimated cost
$100 - $350 (parts and labor)
ANCEL AD310 OBD-II Scanner
Check Your Fluid First
ANCEL AD310 OBD-II Scanner

Read and clear transmission codes. Many trans codes are caused by low or burnt fluid -- check level and color before assuming the worst.

Check Price on Amazon
LAUNCH CRP123X (Reads All Systems)
Read Transmission Codes
LAUNCH CRP123X (Reads All Systems)

Basic scanners only read engine codes. This reads transmission, ABS, and airbag too.

Check Price on Amazon

Affiliate links — we earn a commission at no extra cost to you.

Common Symptoms

  • Check Engine Light illuminated
  • Harsh or delayed shifting
  • Engine RPM flare during shifts
  • Transmission slipping sensation

Probable Causes (Ranked by Likelihood)

  • Degraded crankshaft position sensor signal Very High
  • Air gap too large between CKP sensor and reluctor High
  • Worn reluctor ring teeth Moderate
  • TCM calibration or software issue Low

Frequently Asked Questions

Can I drive with code P0726?

Drive short distances only. Engine Speed Input Circuit Range/Performance can cause unsafe or unpredictable transmission behavior.

What causes P0726?

The most common cause is a faulty sensor or wiring issue. Degraded crankshaft position sensor signal is the most likely cause.

Is P0726 expensive to fix?

Estimated repair costs range from $100 - $350 (parts and labor). Sensor replacement is the most common fix.

Mechanics Guide Step-by-step diagnosis

Step-by-Step Diagnostic Procedure

  1. Monitor engine RPM on a scan tool -- look for noisy or erratic signal during shifts

  2. Compare CKP sensor signal to specification using an oscilloscope

  3. Check CKP sensor air gap and mounting for looseness

  4. Inspect reluctor ring for damaged or worn teeth

  5. Replace CKP sensor if signal quality is poor

Sources 1

This page is built from documented references. Verify against your own service info before repair work.

  • SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)

Commonly Affected Vehicles

  • 2003-2015 Honda Accord
  • 2004-2016 Nissan Pathfinder
  • 2005-2017 Toyota 4Runner
  • 2002-2014 Ford Explorer

Related Codes

Explore More

Was this helpful?

Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.