P0711 moderate

Transmission Fluid Temperature Sensor Range/Performance

The P0711 code means the vehicle's onboard diagnostic system has detected: Transmission Fluid Temperature Sensor Range/Performance. This is a moderate severity code.

My Garage →
Keep driving?
Short distances only
DIY difficulty
moderate
Estimated cost
$80 - $300 (parts and labor)
ANCEL AD310 OBD-II Scanner
Check Your Fluid First
ANCEL AD310 OBD-II Scanner

Read and clear transmission codes. Many trans codes are caused by low or burnt fluid -- check level and color before assuming the worst.

Check Price on Amazon
LAUNCH CRP123X (Reads All Systems)
Read Transmission Codes
LAUNCH CRP123X (Reads All Systems)

Basic scanners only read engine codes. This reads transmission, ABS, and airbag too.

Check Price on Amazon

Affiliate links — we earn a commission at no extra cost to you.

Common Symptoms

  • Check Engine Light illuminated
  • Transmission shifts harshly in cold weather
  • Delayed engagement when shifting from Park
  • Transmission may overheat

Probable Causes (Ranked by Likelihood)

  • Degraded TFT sensor with slow or inaccurate response Very High
  • Contaminated transmission fluid affecting sensor readings High
  • Intermittent wiring connection Moderate
  • TCM calibration issue Low

Frequently Asked Questions

Can I drive with code P0711?

Drive short distances. Inaccurate temperature readings can cause the TCM to use wrong shift pressures, leading to premature wear and potential overheating.

Can old transmission fluid cause P0711?

Yes. Degraded fluid can leave deposits on the TFT sensor, affecting its ability to accurately read temperature. A transmission fluid change may help.

What temperature should transmission fluid reach?

Normal operating temperature is 175-225 degrees F. Temperatures above 250 degrees F accelerate fluid breakdown and transmission damage.

Mechanics Guide Step-by-step diagnosis

Step-by-Step Diagnostic Procedure

  1. Monitor TFT sensor temperature during warm-up -- should rise steadily from ambient to 180-200F

  2. Compare TFT reading to an infrared thermometer on the transmission pan

  3. Check if fluid is dark, burnt, or contaminated -- this can affect sensor accuracy

  4. Wiggle the sensor connector while monitoring live data for dropouts

  5. Replace the TFT sensor if readings lag behind or do not match actual temperature

Sources 1

This page is built from documented references. Verify against your own service info before repair work.

  • SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)

P0711 on Diesel, EV & Equipment

The same code ID appears across other engines and platforms. The diagnostic flow varies by manufacturer — these are the platform-specific breakdowns:

Commonly Affected Vehicles

  • 2004-2016 Honda Accord
  • 2003-2015 Toyota Camry
  • 2005-2017 Nissan Altima
  • 2002-2014 Ford Explorer

Related Codes

Explore More

Was this helpful?

Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.