Fog Lamp Switch Failure (Ford); Low Beam Fault (GM)
The B2472 code means the vehicle's onboard diagnostic system has detected: Fog Lamp Switch Failure (Ford); Low Beam Fault (GM). This is a critical severity code.
- Keep driving?
- No — stop driving
- DIY difficulty
- hard
- Estimated cost
- Varies — depends on the specific component this manufacturer-specific code points to on your vehicle. Diagnose before buying parts.
Manufacturer-specific code. B2472 is a manufacturer-specific DTC, so its exact definition can differ by make, model, and year. Use the meaning above as a general guide, and always confirm it against your vehicle manufacturer's official service information (or a make-specific scan tool) before diagnosing or replacing parts.
Basic scanners skip body codes entirely. BlueDriver reads airbag, HVAC, lighting, and BCM codes through your phone.
Affiliate links — we earn a commission at no extra cost to you.
Common Symptoms
- Check Engine or a related warning light on
- Exact symptoms depend on the specific system this code covers for your make
- A make-specific scan reveals which subsystem and circuit is involved
Probable Causes (Ranked by Likelihood)
- A fault in the specific component or circuit this code monitors (the exact part varies by manufacturer) High
- Damaged wiring, a corroded connector, or a poor ground in that circuit Moderate
- A related sensor or control module reporting or causing the fault Moderate
Frequently Asked Questions
Does B2472 mean the same thing on every vehicle?
No. B2472 is a manufacturer-specific diagnostic trouble code, so its exact meaning varies by make, model, and year. Always confirm it against your vehicle manufacturer's service information before diagnosing or replacing parts.
What does B2472 most likely indicate?
Fog Lamp Switch Failure (Ford); Low Beam Fault (GM). Treat this as a general guide and verify the specifics for your vehicle.
Mechanics Guide Step-by-step diagnosis
Step-by-Step Diagnostic Procedure
-
Confirm your exact make, model, and year first — B2472 is manufacturer-specific and can mean different things across brands.
-
Read B2472 with an enhanced/make-specific scan tool and check your manufacturer's official service information for the precise definition and procedure.
-
Inspect the wiring, connectors, and grounds for the indicated circuit before replacing any part.
Sources 2
This page is built from documented references. Verify against your own service info before repair work.
- obd-codes.comgeneric body-code list ("Fog Lamp Switch Failure") and GM body-code list ("Low Beam Fault", carrying its own make-attribution hedge)
- troublecodes.net
Commonly Affected Vehicles
- 2012-2020 Toyota Camry
- 2010-2019 Honda Accord
- 2011-2020 Ford F-150
- 2013-2020 Chevrolet Silverado
Related Codes
Explore More
Was this helpful?
Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.