Yanmar Marine High Bilge Water Alarm
The YANMAR-MARINE-BILGE-WATER (Yanmar) diesel fault code means: Yanmar Marine High Bilge Water Alarm. This is a critical severity code.
- Keep driving?
- No — stop driving
- DIY difficulty
- intermediate
- Estimated cost
- $20-$2,500
A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Affiliate links — we earn a commission at no extra cost to you.
Common Symptoms
- Bilge alarm / buzzer
- Visible water rising in bilge
Probable Causes (Ranked by Likelihood)
- Failed raw water hose clamp or hose Likely
- Leaking seacock / shaft seal / packing gland Likely
- Heat exchanger end cap leak Possible
Frequently Asked Questions
What is Yanmar code MARINE-BILGE?
Yanmar MARINE-BILGE: Yanmar Marine High Bilge Water Alarm.
Can I keep operating with Yanmar code MARINE-BILGE?
Do not operate. Risk of engine damage.
How much does Yanmar MARINE-BILGE cost to fix?
Typical cost: $20-$2,500. Yanmar SmartAssist / YDT diagnostic software is often required.
Mechanics Guide Step-by-step diagnosis
Step-by-Step Diagnostic Procedure
SAFETY: locate source of water intrusion immediately.
Check raw water plumbing at engine for seep stains or active leak.
Inspect shaft packing / dripless seal bellows.
Commonly Affected Vehicles
- Hunter / Beneteau / Catalina sailboats with Yanmar 3JH / 4JH
- Trawlers with Yanmar 6LY / 6LF series
- Yachts with Yanmar 8LV / 6LY400 common-rail marine diesels
- Workboats with Yanmar 4LV / 4JH series marine propulsion
Explore More
Was this helpful?
Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.