Camshaft Position Sensor "A" Circuit Range/Performance (Bank 1 or Single Sensor)
The POWERSTROKE-P0341 (Power Stroke) diesel fault code means: Camshaft Position Sensor "A" Circuit Range/Performance (Bank 1 or Single Sensor). This is a moderate severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- intermediate
Down with a Power Stroke fault on the road?
We are building a network of verified mobile diesel and reefer technicians along the freight corridor. It is not live yet — no one can be dispatched to you today. You can see where the pilot is launching and register interest.
View pilot availability →A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Affiliate links — we earn a commission at no extra cost to you.
What Are the Symptoms of POWERSTROKE-P0341?
- Check Engine Light on
- Hard starting, long cranking or no start
- Possible stalling or rough running
What Causes POWERSTROKE-P0341? (Most Likely First)
- Sensor reading incorrectly High
- Wiring or connector fault Moderate
- A real fault in the system the sensor measures Moderate
- Shared sensor reference voltage problem Low
Can I Still Drive with POWERSTROKE-P0341?
Yes, but fix soon. POWERSTROKE-P0341 is rated moderate severity. It is not an immediate stop-driving fault, but it will not clear itself — book the repair rather than ignoring it.
Frequently Asked Questions
What does P0341 mean on a Power Stroke?
P0341 means Camshaft Position Sensor "A" Circuit Range/Performance (Bank 1 or Single Sensor). The camshaft position sensor "A" is reporting, but its reading does not make sense against what the engine computer expects from other inputs.
Is P0341 a Power Stroke-specific code?
No. P0341 is a generic OBD-II code defined by SAE J2012, so it means the same thing on any vehicle that sets it. The exact conditions Ford uses to set it on its diesels are in Ford service information.
Mechanics Guide Step-by-step diagnosis
How Do You Diagnose POWERSTROKE-P0341?
Inspect the camshaft position sensor "A" connector and harness.
Compare the camshaft position sensor "A" reading with the other sensors and with operating conditions on a scan tool.
Check for other codes that share the same sensor reference voltage or ground.
Sources 1
This page is built from documented references. Verify against your own service info before repair work.
- SAE J2012Diagnostic Trouble Code Definitions (defines P0341 as a generic OBD-II code)
P0341 on Other Platforms
The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown:
Explore More
Was this helpful?
Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.