Turbo/Super Charger Boost Control Solenoid Circuit/Open
The POWERSTROKE-P0045 (Power Stroke) diesel fault code means: Turbo/Super Charger Boost Control Solenoid Circuit/Open. This is a serious severity code.
- Keep driving?
- Short distances only
- DIY difficulty
- intermediate
Down with a Power Stroke fault on the road?
We are building a network of verified mobile diesel and reefer technicians along the freight corridor. It is not live yet — no one can be dispatched to you today. You can see where the pilot is launching and register interest.
View pilot availability →A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Affiliate links — we earn a commission at no extra cost to you.
What Are the Symptoms of POWERSTROKE-P0045?
- Check Engine Light on
- Reduced power or a reduced power message
- Possible hard starting or rough running
What Causes POWERSTROKE-P0045? (Most Likely First)
- Open wiring or an unplugged connector High
- Failed boost control solenoid High
- Corroded connector Moderate
- Engine computer driver fault Low
Can I Still Drive with POWERSTROKE-P0045?
Short distances only. POWERSTROKE-P0045 is rated serious severity. Keep trips short and get it diagnosed soon rather than waiting for symptoms to worsen.
Frequently Asked Questions
What does P0045 mean on a Power Stroke?
P0045 means Turbo/Super Charger Boost Control Solenoid Circuit/Open. The engine computer has detected an open or faulty control circuit for the boost control solenoid.
Is P0045 a Power Stroke-specific code?
No. P0045 is a generic OBD-II code defined by SAE J2012, so it means the same thing on any vehicle that sets it. The exact conditions Ford uses to set it on its diesels are in Ford service information.
Mechanics Guide Step-by-step diagnosis
How Do You Diagnose POWERSTROKE-P0045?
Inspect the boost control solenoid connector and harness.
Check the boost control solenoid resistance against the service specification.
Check the control circuit for opens and shorts, then command it with a scan tool.
Sources 1
This page is built from documented references. Verify against your own service info before repair work.
- SAE J2012Diagnostic Trouble Code Definitions (defines P0045 as a generic OBD-II code)
P0045 on Other Platforms
The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown:
Explore More
Was this helpful?
Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.