KUBOTA-P200C critical Kubota ›

Diesel Particulate Filter Over Temperature - Bank 1

The KUBOTA-P200C (Kubota) diesel fault code means: Diesel Particulate Filter Over Temperature - Bank 1. This is a critical severity code.

Unverified. We could not confirm this code's definition against freely available manufacturer documentation, so treat the meaning, severity and fix guidance on this page as unconfirmed. Check it against the manufacturer's service information for your exact model and serial range before acting on it. This page is kept out of search engines for that reason, and we are working through this family manual by manual.

My Garage →
Keep driving?
No — stop driving
DIY difficulty
advanced
Estimated cost
$0-$2,500 depending on substrate damage

What Are the Symptoms of KUBOTA-P200C?

  • DPF temp warning
  • Immediate derate

What Causes KUBOTA-P200C? (Most Likely First)

  • Active regen interrupted (machine shut down mid-regen) Very Likely
  • Excess HC from leaking injector Possible

Can I Still Drive with KUBOTA-P200C?

No — stop driving. KUBOTA-P200C is rated critical severity. Continuing to drive in this state risks further damage — get it looked at before your next trip.

Frequently Asked Questions

What is Kubota code P200C?

Kubota P200C means: Diesel Particulate Filter Over Temperature - Bank 1. Critical code -- stop operating until repaired.

Can I keep using my Kubota with P200C?

Critical fault -- do not operate; tow or trailer to a dealer. Use Kubota Diagmaster software (dealer tool) for full diagnostics.

How much does P200C cost to fix on a Kubota?

Repair cost range: $0-$2,500 depending on substrate damage. Compact-tractor labor is typically $110-$150/hr in 2026.

Mechanics Guide Step-by-step diagnosis

How Do You Diagnose KUBOTA-P200C?

  1. Check regen history in Diagmaster.

  2. Inspect injector balance rates.

Sources 1

This page is built from documented references. Verify against your own service info before repair work.

  • SAE J2012Diagnostic Trouble Code Definitions (defines P200C as a generic OBD-II code)

P200C on Other Platforms

The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown:

Which Vehicles Commonly Get KUBOTA-P200C?

  • Kubota BX1880 / BX2380 / BX23S sub-compact tractors
  • Kubota L2501 / L3301 / L3901 utility tractors
  • Kubota L4060 / L4760 / L5060 / L5460 grand L tractors
  • Kubota M5-091 / M5-111 utility tractors
  • Kubota M6S-111 / M7060 / M7-132 / M7-152 tractors
  • Kubota MX5400 / MX6000 utility tractors
  • Kubota SVL65-2 / SVL75-2 / SVL95-2s skid steer loaders
  • Kubota SSV65 / SSV75 skid steer loaders
  • Kubota RTV-X1100C / RTV-X1140 / RTV1140CPX utility vehicles

Explore More

Was this helpful?

Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.