JD-SPN94-FMI1 serious John Deere PowerTech ›

Fuel Supply (Lift) Pressure - Below Normal (Most Severe)

The JD-SPN94-FMI1 (John Deere PowerTech) diesel fault code means: Fuel Supply (Lift) Pressure - Below Normal (Most Severe). This is a serious severity code.

My Garage →
Keep driving?
No -- stop driving
DIY difficulty
intermediate
Estimated cost
$300-$750 lift pump, $35-$120 filter kit
Built for Diesel — Not a Car Reader
ANCEL HD7000 Heavy-Duty Diesel Scanner

A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Lower-Cost Diesel Option
FOXWELL HD301 Diesel Truck Scanner

Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

  • Crank no start
  • Derate at load

Probable Causes (Ranked by Likelihood)

  • Failed lift pump Likely
  • Plugged primary filter / suction strainer Very Likely
  • Cracked suction hose drawing air Possible

Step-by-Step Diagnostic Procedure

  1. Install pressure gauge at test port on filter head; target 4-7 bar per CTM.

  2. Inspect sediment bowl and prescreen.

Frequently Asked Questions

What is John Deere fault code SPN 94 FMI 1?

On John Deere PowerTech engines, SPN 94 FMI 1 means: Fuel Supply (Lift) Pressure - Below Normal (Most Severe). Serious code -- address promptly to avoid inducement / further damage.

Can I keep using my John Deere tractor with SPN 94 FMI 1?

Serious fault -- you can move the machine to a shop but don't run it under load. Diagnose with John Deere Service ADVISOR via an EDL v3 / CF3 interface.

How much does it cost to fix John Deere SPN 94 FMI 1?

Repair cost range: $300-$750 lift pump, $35-$120 filter kit. Dealer labor on large tractors runs $180-$240/hr in 2026.

Sources

This page is built from documented references. Verify against your own service info before repair work.

SPN94-FMI1 on Other Platforms

The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown:

Explore More