Intake Manifold / Boost Pressure Sensor - Voltage Above Normal
The JD-SPN102-FMI3 (John Deere PowerTech) diesel fault code means: Intake Manifold / Boost Pressure Sensor - Voltage Above Normal. This is a moderate severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- beginner
- Estimated cost
- $120-$260 sensor, $80-$300 harness repair
A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Reduced power / derate at high PTO load
- Black smoke at rated load
- MAP sensor fault active on dash
Probable Causes (Ranked by Likelihood)
- MAP/boost sensor harness open or shorted to power Very Likely
- Failed boost pressure sensor Likely
- Corrosion in connector from pressure-wash intrusion Likely
Step-by-Step Diagnostic Procedure
Ohm the sensor signal line back to the ECU -- should read < 5 ohms.
Check for 5V reference at sensor connector with key on.
Swap with known-good sensor from parts tractor to confirm.
Frequently Asked Questions
What is John Deere fault code SPN 102 FMI 3?
On John Deere PowerTech engines, SPN 102 FMI 3 means: Intake Manifold / Boost Pressure Sensor - Voltage Above Normal. Moderate code. Keep working cautiously and plan repair.
Can I keep using my John Deere tractor with SPN 102 FMI 3?
Moderate fault -- continue light use, fix at next service. Diagnose with John Deere Service ADVISOR via an EDL v3 / CF3 interface.
How much does it cost to fix John Deere SPN 102 FMI 3?
Repair cost range: $120-$260 sensor, $80-$300 harness repair. Dealer labor on large tractors runs $180-$240/hr in 2026.
Sources
This page is built from documented references. Verify against your own service info before repair work.