Control Module Performance
The HINO-P0607 (Hino) diesel fault code means: Control Module Performance. This is a serious severity code.
- Keep driving?
- Short distances only
- DIY difficulty
- intermediate
Down with a Hino fault on the road?
We are building a network of verified mobile diesel and reefer technicians along the freight corridor. It is not live yet — no one can be dispatched to you today. You can see where the pilot is launching and register interest.
View pilot availability →A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Affiliate links — we earn a commission at no extra cost to you.
What Are the Symptoms of HINO-P0607?
- Check Engine Light on
- Possible reduced power, stalling or no start
What Causes HINO-P0607? (Most Likely First)
- Internal control module fault High
- Poor power or ground supply to the module Moderate
- Corrupted software Moderate
Can I Still Drive with HINO-P0607?
Short distances only. HINO-P0607 is rated serious severity. Keep trips short and get it diagnosed soon rather than waiting for symptoms to worsen.
Frequently Asked Questions
What does P0607 mean on a Hino?
P0607 means Control Module Performance. The control module has detected that it is not performing as expected in one of its internal checks.
Is P0607 a Hino-specific code?
No. P0607 is a generic OBD-II code defined by SAE J2012, so it means the same thing on any vehicle that sets it. The exact conditions Hino uses to set it on its diesels are in Hino service information.
Mechanics Guide Step-by-step diagnosis
How Do You Diagnose HINO-P0607?
Check battery voltage and the module power and ground circuits first.
Check for a software update.
Replace the module only after power, grounds and software are ruled out.
Sources 3
This page is built from documented references. Verify against your own service info before repair work.
- Hino service bulletin SB-14-029 (filed with NHTSA)troubleshooting for DTC P2201 and P2214 on 2011-2015 Hino 238, 258, 268 and 338, showing these trucks report SAE diagnostic trouble codes
- SAE J1939-73Application Layer: Diagnostics (defines the SPN/FMI fault-identifier framework)
- SAE J2012Diagnostic Trouble Code Definitions (defines P0607 as a generic OBD-II code)
P0607 on Other Platforms
The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown:
Explore More
Was this helpful?
Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.