Fuel Level Sensor "A" Circuit Range/Performance
The HINO-P0461 (Hino) diesel fault code means: Fuel Level Sensor "A" Circuit Range/Performance. This is a minor severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- intermediate
Down with a Hino fault on the road?
We are building a network of verified mobile diesel and reefer technicians along the freight corridor. It is not live yet — no one can be dispatched to you today. You can see where the pilot is launching and register interest.
View pilot availability →A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Affiliate links — we earn a commission at no extra cost to you.
What Are the Symptoms of HINO-P0461?
- Fuel gauge erratic, stuck, or reading full or empty
- Possible warning light
What Causes HINO-P0461? (Most Likely First)
- Failed or sticking fuel level sender High
- Damaged wiring or a corroded connector at the tank High
- Instrument cluster or module input fault Low
Can I Still Drive with HINO-P0461?
Yes, but fix soon. HINO-P0461 is rated minor severity. It is not an immediate stop-driving fault, but it will not clear itself — book the repair rather than ignoring it.
Frequently Asked Questions
What does P0461 mean on a Hino?
P0461 means Fuel Level Sensor "A" Circuit Range/Performance. The fuel level reading does not change the way the control module expects as fuel is used or added.
Is P0461 a Hino-specific code?
No. P0461 is a generic OBD-II code defined by SAE J2012, so it means the same thing on any vehicle that sets it. The exact conditions Hino uses to set it on its diesels are in Hino service information.
Mechanics Guide Step-by-step diagnosis
How Do You Diagnose HINO-P0461?
Compare the gauge reading with fuel actually added at a fill-up.
Check the sender resistance through its range against the specification.
Inspect the wiring and connector at the tank.
Sources 2
This page is built from documented references. Verify against your own service info before repair work.
- Hino service bulletin SB-14-029 (filed with NHTSA)troubleshooting for DTC P2201 and P2214 on 2011-2015 Hino 238, 258, 268 and 338, showing these trucks report SAE diagnostic trouble codes
- SAE J2012Diagnostic Trouble Code Definitions (defines P0461 as a generic OBD-II code)
P0461 on Other Platforms
The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown:
Explore More
Was this helpful?
Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.