DURAMAX-P0103 moderate Duramax ›

Mass or Volume Air Flow Circuit High Input

The DURAMAX-P0103 (Duramax) diesel fault code means: Mass or Volume Air Flow Circuit High Input. This is a moderate severity code.

My Garage →
Keep driving?
Yes, with caution
DIY difficulty
easy
Mobile mechanic network · I-5 corridor pilot

Down with a Duramax fault on the road?

We are building a network of verified mobile diesel and reefer technicians along the freight corridor. It is not live yet — no one can be dispatched to you today. You can see where the pilot is launching and register interest.

View pilot availability →
Built for Diesel — Not a Car Reader
ANCEL HD7000 Heavy-Duty Diesel Scanner

A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).

Check Price on Amazon
FOXWELL HD301 Diesel Truck Scanner
Lower-Cost Diesel Option
FOXWELL HD301 Diesel Truck Scanner

Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.

Check Price on Amazon

Affiliate links — we earn a commission at no extra cost to you.

What Are the Symptoms of DURAMAX-P0103?

  • Check Engine Light on
  • Reduced power or poor throttle response
  • Possible black smoke

What Causes DURAMAX-P0103? (Most Likely First)

  • Failed airflow sensor High
  • Open ground or signal wire shorted to voltage High
  • Corroded or loose connector Moderate
  • Engine computer input fault Low

Can I Still Drive with DURAMAX-P0103?

Yes, with caution. DURAMAX-P0103 is rated moderate severity. Keep trips short and get it diagnosed soon rather than waiting for symptoms to worsen.

Frequently Asked Questions

What does P0103 mean on a Duramax?

P0103 means Mass or Volume Air Flow Circuit High Input. The airflow sensor signal is above its normal range, which usually points to an open ground, a short to voltage, or a failed sensor.

Is P0103 a Duramax-specific code?

No. P0103 is a generic OBD-II code defined by SAE J2012, so it means the same thing on any vehicle that sets it. The exact conditions GM uses to set it on its diesels are in GM service information.

Mechanics Guide Step-by-step diagnosis

How Do You Diagnose DURAMAX-P0103?

  1. Inspect the sensor connector and harness.

  2. Check the sensor supply voltage, ground and signal against the service specification.

  3. Watch the airflow reading on a scan tool while wiggling the harness.

Sources 1

This page is built from documented references. Verify against your own service info before repair work.

  • SAE J2012Diagnostic Trouble Code Definitions (defines P0103 as a generic OBD-II code)

P0103 on Other Platforms

The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown:

Gas / Automotive (OBD-II) Generic OBD-II definition for P0103 Hino moderate Mass or Volume Air Flow Circuit High Input Isuzu moderate MAF Sensor Circuit High PACCAR moderate MAF Sensor Circuit High Power Stroke moderate Mass or Volume Air Flow Circuit High Input

Explore More

More Duramax codes → Diesel home All diesel codes Heavy-duty Guides

Was this helpful?

Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.