Engine Exhaust Gas Recirculation 1 Valve Position — Voltage Above Normal or Shorted High
The DD-27-3 (Detroit Diesel DD Series) diesel fault code means: Engine Exhaust Gas Recirculation 1 Valve Position — Voltage Above Normal or Shorted High. This is a moderate severity code.
This is a standard J1939 fault, not a proprietary code. DD-27-3 is how this equipment displays SPN 27 with FMI 3 (voltage above normal or shorted high) under the SAE J1939 standard used across heavy equipment. The same SPN can appear on any J1939-compliant machine regardless of brand — so cross-referencing it against your engine maker's documentation is valid even when the equipment brand differs.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- intermediate
Down with a Detroit Diesel fault on the road?
We are building a network of verified mobile diesel and reefer technicians along the freight corridor. It is not live yet — no one can be dispatched to you today. You can see where the pilot is launching and register interest.
View pilot availability →A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Affiliate links — we earn a commission at no extra cost to you.
What Are the Symptoms of DD-27-3?
- Check Engine or an aftertreatment warning light
- The Engine Exhaust Gas Recirculation 1 Valve Position signal pegged high or low; the controller may substitute a default value
What Causes DD-27-3? (Most Likely First)
- Open, shorted or chafed wiring in the sensor circuit High
- Failed sensor High
- Loss of the sensor reference or ground Medium
Can I Still Drive with DD-27-3?
Yes, but fix soon. DD-27-3 is rated moderate severity. It is not an immediate stop-driving fault, but it will not clear itself — book the repair rather than ignoring it.
Frequently Asked Questions
What does SPN 27 FMI 3 mean?
SPN 27 is "Engine Exhaust Gas Recirculation 1 Valve Position" in the SAE J1939 Digital Annex, and FMI 3 means the sensor or actuator circuit is reading high voltage. Together they say the sensor or actuator circuit is reading high voltage for that parameter.
Is this a Detroit Diesel-specific code?
No. It is a standard J1939 SPN and FMI pair, so the parameter and failure mode mean the same on any J1939 engine. What Detroit Diesel checks before setting it, and what the truck does about it, is in Detroit Diesel service information.
Mechanics Guide Step-by-step diagnosis
How Do You Diagnose DD-27-3?
Check reference voltage, ground and signal at the sensor connector.
Check the signal wire for a short to voltage or ground back to the controller.
Inspect the connector for corrosion or damage.
Sources 2
This page is built from documented references. Verify against your own service info before repair work.
- SPN 27 record in the ISOBUS Data Dictionary (ISO 11783 online database), reproducing the SAE heavy-duty Digital Annex (DA) name "Engine Exhaust Gas Recirculation 1 Valve Position". Establishes what the SPN names, not what a Detroit Diesel display shows for it.ISO 11783 online database copy of the SAE J1939 Digital Annex SPN list — readable, not SAE’s current edition
- SAE J1939-73Application Layer: Diagnostics (defines the SPN/FMI fault-identifier framework)
Explore More
Was this helpful?
Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.