Crankcase Pressure High
The DD-101-0 (Detroit Diesel DD Series) diesel fault code means: Crankcase Pressure High. This is a serious severity code.
This is a standard J1939 fault, not a proprietary code. DD-101-0 is how this equipment displays SPN 101 with FMI 0 (data valid but above normal — most severe) under the SAE J1939 standard used across heavy equipment. The same SPN can appear on any J1939-compliant machine regardless of brand — so cross-referencing it against your engine maker's documentation is valid even when the equipment brand differs.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- intermediate
- Estimated cost
- $1,200-$3,800
Down with a Detroit Diesel fault on the road?
Get connected with a verified mobile diesel mechanic near you. Verified diesel & reefer techs, launching on the freight corridor.
Find a mobile mechanic →A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Affiliate links — we earn a commission at no extra cost to you.
Common Symptoms
- Check Engine Light / Amber Warning Lamp illuminated
- Engine derate (reduced torque / 5 mph limp)
- Blow-by excessive
- Black or white smoke from exhaust
Probable Causes (Ranked by Likelihood)
- Plugged crankcase ventilation filter (CCV) Very Likely
- Oil separator membrane failure Likely
- Worn piston rings / cylinder liners Possible
- Turbo seal failure pushing gas into crankcase Possible
Frequently Asked Questions
What is Detroit Diesel fault code DD-101-0?
Detroit Diesel fault DD-101-0 (SPN 101 FMI 0) indicates: Crankcase Pressure High. It is a serious-severity fault and is commonly seen on DD13/DD15/DD16 engines in Freightliner and Western Star chassis.
Can I drive my Freightliner or Western Star with fault DD-101-0?
It depends on severity. Critical and serious faults trigger derate or engine shutdown — do not continue driving. Moderate faults usually allow continued operation short-term but schedule repair to prevent cascading aftertreatment damage.
How much does it cost to fix Detroit Diesel fault DD-101-0?
Estimated repair cost is $1,200-$3,800. Sensor/harness fixes fall at the low end; turbo actuator, injector, aftertreatment component, or head gasket repairs fall at the high end. Detroit DDDL software and sometimes factory parameter reset are required for proper reset.
Mechanics Guide Step-by-step diagnosis
Step-by-Step Diagnostic Procedure
Replace CCV filter first — a 500K+ mile truck needs it.
Inspect oil separator/breather assembly; membrane often cracks.
Perform a blow-by test to quantify engine wear.
If mechanical wear confirmed, major engine work is needed.
Sources 1
This page is built from documented references. Verify against your own service info before repair work.
- SAE J1939-73Application Layer: Diagnostics (defines the SPN/FMI fault-identifier framework)
Commonly Affected Vehicles
- Freightliner Cascadia with DD15
- Freightliner Cascadia with DD13
- Freightliner Cascadia with DD16
- Western Star 4700 with DD13/DD15
- Western Star 4900 with DD15/DD16
- Western Star 5700 XE with DD15
- Freightliner M2 106 with DD13
- Freightliner M2 112 with DD13
Related Codes
Explore More
Was this helpful?
Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.