Evaporative Emission System Leak Detection Pump Sense Circuit High
The P2406 code means the vehicle's onboard diagnostic system has detected: Evaporative Emission System Leak Detection Pump Sense Circuit High. This is a low severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- moderate
- Estimated cost
- $100 - $400 (parts and labor)
Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.
Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.
Affiliate links — we earn a commission at no extra cost to you.
Common Symptoms
- Check Engine Light illuminated
- Failed emissions inspection
- No effect on vehicle performance
- EVAP readiness monitor incomplete
- Fuel vapor smell near vehicle possible
Probable Causes (Ranked by Likelihood)
- Open sense wire in leak detection pump circuit Very High
- Failed pressure sensor in pump (reading high) High
- Disconnected pump sense connector Moderate
- ECM sense input pulled high due to open circuit Moderate
Frequently Asked Questions
Can I drive with code P2406?
Yes, safe to drive with no impact on vehicle operation. Only emissions testing is affected.
What causes P2406?
Usually an open circuit in the pump sense wiring or a disconnected connector. Check the connector first for a quick fix.
Is P2406 expensive to fix?
Typically $100 to $400. A disconnected connector costs nothing to fix. Pump assembly replacement is the most expensive option.
Mechanics Guide Step-by-step diagnosis
Step-by-Step Diagnostic Procedure
-
Check pump connector for disconnected or damaged sense wire pin
-
Measure sense circuit voltage at the ECM connector
-
Inspect wiring for open circuits between pump and ECM
-
Test pump sensor with scan tool live data
-
Check for recent undercarriage work that may have disturbed wiring
Sources 2
This page is built from documented references. Verify against your own service info before repair work.
- SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)
- Cross-checked against the SAE J2012:2002 DTC table (2026-08-27)archived scan of the SAE standard — readable copy, not SAE’s current edition
Commonly Affected Vehicles
- 2012-2020 Jeep Grand Cherokee
- 2013-2021 Dodge Durango
- 2011-2019 Ram 1500
- 2014-2022 Chrysler 300
Related Codes
Explore More
Was this helpful?
Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.