P2041 moderate

Reductant Injection Air Pressure Sensor Circuit Intermittent

The P2041 code means the vehicle's onboard diagnostic system has detected: Reductant Injection Air Pressure Sensor Circuit Intermittent. This is a moderate severity code.

My Garage →
Keep driving?
Short distances only
DIY difficulty
hard
Estimated cost
$200 - $600 (parts and labor)
ANCEL AD310 OBD-II Scanner
Recommended Tool
ANCEL AD310 OBD-II Scanner

Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.

Check Price on Amazon
AstroAI Digital Multimeter
Every Tech Needs This
AstroAI Digital Multimeter

Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.

Check Price on Amazon

Affiliate links — we earn a commission at no extra cost to you.

Common Symptoms

  • Check Engine Light on intermittently
  • DEF system warning may come and go
  • Occasional power reduction
  • SCR efficiency intermittently low
  • CEL may clear and return

Probable Causes (Ranked by Likelihood)

  • Loose air pressure sensor connector Very High
  • Intermittent wiring fault from vibration High
  • Failing air pressure sensor Moderate
  • Corroded connector pins making poor contact Moderate
  • PCM intermittent input fault Low

Frequently Asked Questions

What does P2041 mean?

P2041 indicates the reductant injection air pressure sensor signal is intermittent, typically from a loose connector or wiring fault that causes the signal to drop in and out.

Can I drive with a P2041 code?

Short-distance driving is acceptable, but the intermittent fault may cause the DEF system to function erratically.

How much does it cost to fix P2041?

Repairs typically cost $200 to $600, often involving connector repair or wiring harness replacement.

Mechanics Guide Step-by-step diagnosis

Step-by-Step Diagnostic Procedure

  1. Confirm P2041 and review freeze frame data for intermittent conditions

  2. Wiggle-test sensor connector and wiring while monitoring signal

  3. Inspect connector pin tension and cleanliness

  4. Check wiring routing for chafing against moving parts

Sources 1

This page is built from documented references. Verify against your own service info before repair work.

  • SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)

Commonly Affected Vehicles

  • 2012-2018 BMW 328d 2.0L Diesel
  • 2010-2016 Mercedes-Benz ML350 3.0L BlueTEC
  • 2014-2020 Ram 3500 6.7L Cummins
  • 2011-2017 Ford F-350 6.7L Power Stroke

Related Codes

Explore More

Was this helpful?

Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.