P2013 moderate

Intake Manifold Runner Control Circuit High (Bank 2)

The P2013 code means the vehicle's onboard diagnostic system has detected: Intake Manifold Runner Control Circuit High (Bank 2). This is a moderate severity code.

My Garage →
Keep driving?
Short distances only
DIY difficulty
moderate
Estimated cost
$100 - $400 (parts and labor)
ANCEL AD310 OBD-II Scanner
Recommended Tool
ANCEL AD310 OBD-II Scanner

Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.

Check Price on Amazon
AstroAI Digital Multimeter
Every Tech Needs This
AstroAI Digital Multimeter

Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.

Check Price on Amazon

Affiliate links — we earn a commission at no extra cost to you.

Common Symptoms

  • Check Engine Light illuminated
  • Reduced engine performance
  • Rough idle
  • Poor acceleration response
  • Slightly worse fuel economy

Probable Causes (Ranked by Likelihood)

  • Short to power in Bank 2 runner control wiring Very High
  • Failed Bank 2 runner control solenoid High
  • Heat-damaged wiring near exhaust manifold Moderate
  • Corroded connector terminals Moderate
  • PCM output driver malfunction Low

Frequently Asked Questions

What does P2013 mean?

P2013 indicates a high voltage condition in the Bank 2 intake manifold runner control circuit, usually from a wiring short to battery voltage or an internal solenoid failure.

Can I drive with a P2013 code?

Short-distance driving is safe. Expect slightly reduced performance, especially at low RPMs.

How much does it cost to fix P2013?

Costs typically range from $100 to $400 depending on whether the issue is a wiring repair or a solenoid replacement.

Mechanics Guide Step-by-step diagnosis

Step-by-Step Diagnostic Procedure

  1. Confirm P2013 with freeze frame data

  2. Inspect wiring and connector to Bank 2 runner control solenoid

  3. Test for shorts to battery voltage in the circuit

  4. Measure solenoid resistance and compare to OEM specs

Sources 1

This page is built from documented references. Verify against your own service info before repair work.

  • SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)

Commonly Affected Vehicles

  • 2012-2018 BMW 328d 2.0L Diesel
  • 2010-2016 Mercedes-Benz ML350 3.0L BlueTEC
  • 2014-2020 Ram 3500 6.7L Cummins
  • 2011-2017 Ford F-350 6.7L Power Stroke

Related Codes

Explore More

Was this helpful?

Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.