14 Volt Power Module Current Sensor Circuit Intermittent
The P0A8A code means the vehicle's onboard diagnostic system has detected: 14 Volt Power Module Current Sensor Circuit Intermittent. This is a moderate severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- moderate
- Estimated cost
- $100 - $500 (wiring at the low end; the sensor is often integrated with the DC/DC converter)
Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.
Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.
Affiliate links — we earn a commission at no extra cost to you.
Common Symptoms
- Check Engine Light on
- Possible erratic 12V charging behavior
- Current reading implausible or frozen on a scan tool
- Often no drivability symptom
Probable Causes (Ranked by Likelihood)
- Failed 14 Volt Power Module Current Sensor High
- Damaged wiring or connector in the sensor circuit High
- DC/DC converter internal fault (the sensor often lives inside it) Moderate
Frequently Asked Questions
What does P0A8A mean?
P0A8A means the 14 Volt Power Module Current Sensor circuit is faulty - the module cannot trust its measurement of 14-volt system current.
Can I keep driving with P0A8A?
Generally yes. Charging usually continues; the module has just lost one of its measurements. Diagnose soon to be sure the 12V system stays healthy.
Is P0A8A safe to work on myself?
This code involves the high-voltage system. Do not open the HV battery, inverter, or any orange-cabled component without hybrid-specific training, insulated gloves, and the service plug removed. Diagnosis beyond a scan-tool read belongs at a hybrid-qualified shop.
Mechanics Guide Step-by-step diagnosis
Step-by-Step Diagnostic Procedure
-
Read the live current value from the 14 Volt Power Module Current Sensor and sanity-check it against actual electrical load.
-
Measure 12V system voltage in READY to confirm charging is otherwise healthy.
-
Inspect accessible wiring and connectors.
-
Follow the OEM pinpoint test - if the sensor is internal to the converter, diagnosis differs by model.
Sources 1
This page is built from documented references. Verify against your own service info before repair work.
- SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)
Commonly Affected Vehicles
- Toyota/Lexus hybrids (Prius, Camry Hybrid, RAV4 Hybrid)
- Ford/Lincoln hybrids (Escape, Fusion, C-MAX)
- Honda hybrids (Insight, Civic Hybrid, Accord Hybrid)
- Hyundai/Kia hybrids and plug-in hybrids
Related Codes
Explore More
Was this helpful?
Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.