Drive Motor "B" Temperature Sensor Circuit Low
The P0A32 code means the vehicle's onboard diagnostic system has detected: Drive Motor "B" Temperature Sensor Circuit Low. This is a moderate severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- moderate
- Estimated cost
- $100 - $500 (often wiring or a connector; sensor replacement cost depends on its location - diagnose before buying parts)
Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.
Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.
Affiliate links — we earn a commission at no extra cost to you.
Common Symptoms
- Check Engine Light on
- Hybrid system may reduce power or limit EV-only operation as a precaution
- Temperature or sensor reading stuck, erratic, or implausible on a scan tool
- Often no drivability symptom at all - the module just distrusts the reading
Probable Causes (Ranked by Likelihood)
- Failed Drive Motor "B" Temperature Sensor High
- Damaged wiring, chafed harness, or a corroded connector in the sensor circuit High
- Poor ground or reference-voltage fault shared with other sensors Moderate
- Control module fault misreading a good sensor Low
Frequently Asked Questions
What does P0A32 mean?
P0A32 means the control module sees a fault in the Drive Motor "B" Temperature Sensor circuit - the signal is open, shorted, out of range, or not behaving the way a real sensor should.
Can I keep driving with P0A32?
Generally yes for a short period - a sensor-circuit fault by itself rarely strands you, but the hybrid system may protect itself by reducing power, and a wrong temperature reading can hide a real overheating problem. Get it diagnosed soon.
Is P0A32 safe to work on myself?
This code involves the high-voltage system. Do not open the HV battery, inverter, or any orange-cabled component without hybrid-specific training, insulated gloves, and the service plug removed. Diagnosis beyond a scan-tool read belongs at a hybrid-qualified shop.
Mechanics Guide Step-by-step diagnosis
Step-by-Step Diagnostic Procedure
-
Read the code and freeze-frame data with a hybrid-capable scan tool and watch the live value from the Drive Motor "B" Temperature Sensor.
-
Compare the reading against a known reference (a cold engine should read near ambient; paired sensors should agree).
-
Inspect the sensor connector and harness for corrosion, chafing, and bent pins before replacing anything.
-
Check the sensor's signal, ground, and reference voltage at the connector against the service-manual values.
-
Clear the code and confirm the fix with a road test while logging the sensor value.
Sources 1
This page is built from documented references. Verify against your own service info before repair work.
- SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)
Commonly Affected Vehicles
- Toyota/Lexus hybrids (Prius, Camry Hybrid, RAV4 Hybrid)
- Ford/Lincoln hybrids (Escape, Fusion, C-MAX)
- Honda hybrids (Insight, Civic Hybrid, Accord Hybrid)
- Hyundai/Kia hybrids and plug-in hybrids
Related Codes
Explore More
Was this helpful?
Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.