P0005 critical

Fuel Shutoff Valve "A" Control Circuit/Open

The P0005 code means the vehicle's onboard diagnostic system has detected: Fuel Shutoff Valve "A" Control Circuit/Open. This is a critical severity code.

My Garage →
Keep driving?
No — stop driving
DIY difficulty
hard
Estimated cost
$200 - $700 (parts and labor)
ANCEL AD310 OBD-II Scanner
Recommended Tool
ANCEL AD310 OBD-II Scanner

Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.

Check Price on Amazon
AstroAI Digital Multimeter
Every Tech Needs This
AstroAI Digital Multimeter

Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.

Check Price on Amazon

Affiliate links — we earn a commission at no extra cost to you.

Common Symptoms

  • Engine will not start
  • Engine stalls and will not restart
  • Check Engine Light on
  • Fuel shutoff warning indicator

Probable Causes (Ranked by Likelihood)

  • Open circuit in fuel shutoff valve wiring Very High
  • Failed fuel shutoff valve solenoid High
  • Disconnected or corroded connector at shutoff valve Moderate
  • Blown fuse in fuel shutoff circuit Moderate

Frequently Asked Questions

What is a fuel shutoff valve?

The fuel shutoff valve is a safety device that cuts fuel supply to the engine. It is commonly used on diesel engines to shut down the engine since diesels do not have a throttle to cut airflow. When this valve fails open-circuit, the ECM cannot control fuel delivery.

Why will my engine not start with P0005?

If the fuel shutoff valve cannot be energized due to an open circuit, it remains in its default closed position, blocking fuel to the engine. Without fuel, the engine will crank but not start.

Can a blown fuse cause P0005?

Yes. A blown fuse in the fuel shutoff valve circuit will cause an open circuit condition. Check the fuse box for the fuel system fuses before replacing more expensive components.

Mechanics Guide Step-by-step diagnosis

Step-by-Step Diagnostic Procedure

  1. Check all fuses related to the fuel system and fuel shutoff valve circuit

  2. Inspect the fuel shutoff valve connector for corrosion, backed-out pins, or physical damage

  3. Measure resistance across the fuel shutoff valve solenoid; an open reading confirms a failed valve

  4. Trace wiring from ECM to shutoff valve checking for breaks, especially at flex points and connectors

Sources 1

This page is built from documented references. Verify against your own service info before repair work.

  • SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)

Commonly Affected Vehicles

  • 2008-2018 Ford F-250 Super Duty 6.7L
  • 2010-2020 Ram 2500 6.7L Cummins
  • 2011-2019 Chevrolet Silverado 2500HD Duramax
  • 2012-2020 Ford Transit 3.2L Diesel

Related Codes

Explore More

Was this helpful?

Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.