C0594 moderate

Right Rear Solenoid Circuit Open (GM)

The C0594 code means the vehicle's onboard diagnostic system has detected: Right Rear Solenoid Circuit Open (GM). This is a moderate severity code.

My Garage →
Keep driving?
Yes, but fix soon
DIY difficulty
moderate
Estimated cost
$100 - $500 (diagnose before parts)
BlueDriver Bluetooth Pro Scanner
Read ABS Codes
BlueDriver Bluetooth Pro Scanner

Basic scanners cannot read ABS codes. BlueDriver reads all systems including ABS, SRS, and transmission through your phone.

Check Price on Amazon
LAUNCH CRP123X (Reads ABS + Chassis)
Read ABS Codes
LAUNCH CRP123X (Reads ABS + Chassis)

Basic scanners cannot read ABS codes. This one reads all four systems so you know exactly which sensor failed.

Check Price on Amazon

Affiliate links — we earn a commission at no extra cost to you.

Common Symptoms

  • Warning light on
  • Behavior of the affected chassis system degraded

Probable Causes (Ranked by Likelihood)

  • Fault in the chassis control component this code names (Right Rear Solenoid Circuit Open) High
  • Damaged wiring or a corroded connector in that circuit - road-splash zones corrode connectors High
  • Failed related sensor or actuator Moderate
  • Control module fault Low

Frequently Asked Questions

What does C0594 mean?

C0594 is a chassis code used primarily by GM vehicles: Right Rear Solenoid Circuit Open. It concerns the chassis control system.

Can I keep driving with C0594?

Generally yes; the chassis control system may be degraded. Diagnose soon, and treat any brake- or steering-related behavior change as urgent.

Is C0594 the same on every make?

The decimal C0xxx range is dominated by GM's assignments (Chevrolet, GMC, Buick, Cadillac). Other makes may use this ID differently - if your vehicle is not a GM product, verify the meaning in your make's service information.

Mechanics Guide Step-by-step diagnosis

Step-by-Step Diagnostic Procedure

  1. Read the code with a GM-capable scan tool and note the symptom byte/subcode if shown.

  2. View live data for the named circuit (e.g. all four wheel speeds while rolling for wheel-speed codes).

  3. Inspect the circuit's wiring and connectors - chassis harnesses live in the splash zone and corrode first.

  4. Follow the GM pinpoint test for C0594 before replacing components.

Sources 1

This page is built from documented references. Verify against your own service info before repair work.

  • SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)

Commonly Affected Vehicles

  • Chevrolet, GMC, Buick, Cadillac (GM chassis code range)

Related Codes

Explore More

Was this helpful?

Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.