C0265 serious

EBCM Relay Circuit (GM)

The C0265 code means the vehicle's onboard diagnostic system has detected: EBCM Relay Circuit (GM). This is a serious severity code.

My Garage →
Keep driving?
Yes, but fix soon
DIY difficulty
moderate
Estimated cost
$100 - $600 (wheel-speed sensor or wiring most often; EBCM/pump work costs more)
BlueDriver Bluetooth Pro Scanner
Read ABS Codes
BlueDriver Bluetooth Pro Scanner

Basic scanners cannot read ABS codes. BlueDriver reads all systems including ABS, SRS, and transmission through your phone.

Check Price on Amazon
LAUNCH CRP123X (Reads ABS + Chassis)
Read ABS Codes
LAUNCH CRP123X (Reads ABS + Chassis)

Basic scanners cannot read ABS codes. This one reads all four systems so you know exactly which sensor failed.

Check Price on Amazon

Affiliate links — we earn a commission at no extra cost to you.

Common Symptoms

  • ABS and/or traction control warning lights on
  • ABS and stability assist may be disabled (base brakes still work)
  • Possible false ABS activation at low speed with a failing wheel-speed sensor

Probable Causes (Ranked by Likelihood)

  • Fault in the ABS/traction control component this code names (EBCM Relay Circuit) High
  • Damaged wiring or a corroded connector in that circuit - road-splash zones corrode connectors High
  • Failed related sensor or actuator Moderate
  • Control module fault Low

Common Fixes by Vehicle

What techs usually find when diagnosing C0265 on specific vehicles — tap your vehicle for the fix and the exact part:

2007-2014 Chevrolet Silverado/GMC Sierra 1500 hard DIY

EBCM (Electronic Brake Control Module) motor relay circuit failure is a known issue on these trucks. The EBCM is mounted on the ABS hydraulic unit under the hood. The internal relay solders crack from vibration. Some shops offer EBCM rebuild services for less than a new unit. If replacing, the new EBCM must be programmed with a GM Tech2 or equivalent to configure the brake configuration.

Labor: 2-3 hours
2007-2017 Chevrolet Tahoe/Suburban/Yukon hard DIY

Same EBCM failure as the trucks. A temporary fix is to remove the EBCM, re-solder the cracked relay joints (requires soldering experience and opening the module), and reinstall. YouTube has detailed teardown videos. If the ABS pump motor itself has seized, the entire ABS modulator assembly needs replacement. A seized motor will be hot to the touch after driving.

Labor: 2-4 hours
2006-2013 Chevrolet Corvette C6 hard DIY

The C6 Corvette EBCM fails at a high rate. The unit is under the rear of the car. GM ran a coverage program on some 2006-2009 models. Check with a dealer for coverage. Aftermarket EBCM repair services (Module Master, BBA Reman) can rebuild the unit for roughly half the cost of a new one.

Labor: 2-3 hours

Frequently Asked Questions

What does C0265 mean?

C0265 is a chassis code used primarily by GM vehicles: EBCM Relay Circuit. It concerns the ABS/traction control system.

Can I keep driving with C0265?

Base brakes keep working, but assume ABS and stability control are offline until repaired - allow longer stopping distances and drive gently, especially in rain or snow. Repair promptly.

Is C0265 the same on every make?

The decimal C0xxx range is dominated by GM's assignments (Chevrolet, GMC, Buick, Cadillac). Other makes may use this ID differently - if your vehicle is not a GM product, verify the meaning in your make's service information.

Mechanics Guide Step-by-step diagnosis, and what most sources get wrong

Step-by-Step Diagnostic Procedure

  1. Read the code with a GM-capable scan tool and note the symptom byte/subcode if shown.

  2. View live data for the named circuit (e.g. all four wheel speeds while rolling for wheel-speed codes).

  3. Inspect the circuit's wiring and connectors - chassis harnesses live in the splash zone and corrode first.

  4. Follow the GM pinpoint test for C0265 before replacing components.

Common Misconceptions / Fact Check

  • Commonly claimedGuides often tell you to swap the EBCM relay in the fuse box for C0265.

    VerifiedOn the GM trucks that set C0265 there is no plug-in relay to swap: the motor relay is soldered inside the EBCM. The documented repair is resoldering cracked internal joints or rebuilding the module, not replacing a fuse-box relay.

Sources 1

This page is built from documented references. Verify against your own service info before repair work.

  • SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)

Commonly Affected Vehicles

  • Chevrolet, GMC, Buick, Cadillac (GM chassis code range)

Related Codes

See All Codes & Fixes for Your Vehicle

Explore More

Was this helpful?

Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.