Lost Communication With Audio Amplifier Module A
What does U0186 mean?
The U0186 code means the vehicle's onboard diagnostic system has detected: Lost Communication With Audio Amplifier Module A. This is a low severity code.
Common Symptoms
- No sound from speakers despite head unit functioning
- Audio cuts in and out intermittently
- Distorted or crackling sound from speakers
- Subwoofer not producing bass output
- Volume control has no effect on sound level
Probable Causes (Ranked by Likelihood)
- Failed external audio amplifier Very High
- Damaged wiring to amplifier (often in trunk) High
- Water damage to amplifier from trunk leak Moderate
- Corroded amplifier power or ground connection Moderate
Step-by-Step Diagnostic Procedure
-
Locate the amplifier (commonly in trunk, under rear seat, or under dashboard)
-
Check power and ground at the amplifier connector
-
Inspect the trunk or amplifier area for signs of water leaks
-
Verify CAN bus or audio signal wiring to the amplifier
-
Check the amplifier fuse
Frequently Asked Questions
Can I drive with code U0186?
Yes, safe to drive. You will have no audio or degraded audio quality, but all vehicle driving and safety systems remain fully operational.
What causes U0186?
Usually a failed external amplifier, often caused by water intrusion in the trunk area. Trucks and SUVs are prone to trunk seal leaks that damage amplifiers.
Is U0186 expensive to fix?
Expect $200 to $800. OEM amplifier replacement with premium audio systems is on the higher end. Also check for and fix any water leaks to prevent recurrence.