Secondary Air Injection System Air Flow/Pressure Sensor Circuit Low - Bank 2
What does P2432 mean?
The P2432 code means the vehicle's onboard diagnostic system has detected: Secondary Air Injection System Air Flow/Pressure Sensor Circuit Low - Bank 2. This is a low severity code.
Common Symptoms
- Check Engine Light illuminated
- Failed emissions test
- No noticeable driving issues
- Secondary air system warning may display
- Cold start emissions elevated
Probable Causes (Ranked by Likelihood)
- Shorted secondary air pressure sensor Very High
- Short to ground in sensor wiring High
- Corroded sensor connector Moderate
- ECM sensor input circuit fault Low
Step-by-Step Diagnostic Procedure
-
Measure sensor signal voltage (should not be near 0V with key on)
-
Check sensor wiring for shorts to ground
-
Inspect sensor connector for corrosion or water damage
-
Measure sensor resistance and compare to specification
-
Verify ECM sensor input with a voltmeter at the ECM connector
Frequently Asked Questions
Can I drive with code P2432?
Yes, safe to drive. Only the secondary air injection system monitoring is affected.
What causes P2432?
Usually a shorted pressure sensor or wiring. The sensor may have failed internally or water may have entered the connector.
Is P2432 expensive to fix?
Typically $100 to $400. Sensor replacement is the most common fix. Wiring repair is less expensive if that is the cause.