P1250 moderate

Pressure Regulator Control Solenoid Malfunction (Ford)

What does P1250 mean?

The P1250 code means the vehicle's onboard diagnostic system has detected: Pressure Regulator Control Solenoid Malfunction (Ford). This is a moderate severity code.

Common Symptoms

  • Check Engine Light on
  • Rough idle especially when cold
  • Engine stalls at idle
  • Poor fuel economy
  • Hesitation on acceleration from stop

Probable Causes (Ranked by Likelihood)

  • Fuel pressure regulator solenoid failure Very High
  • Vacuum leak at pressure regulator line High
  • Clogged fuel pressure regulator Moderate
  • Wiring fault to pressure regulator solenoid Moderate
  • PCM fuel pressure control circuit failure Low

Step-by-Step Diagnostic Procedure

  1. Test fuel pressure regulator solenoid resistance

  2. Inspect vacuum line to regulator for cracks

  3. Measure fuel pressure at idle and under load

  4. Check wiring and connector at the solenoid

  5. Monitor fuel trim values for pressure regulation issues

Frequently Asked Questions

What is the pressure regulator control solenoid?

This solenoid controls the fuel pressure regulator, adjusting fuel pressure based on engine load and vacuum conditions.

Can P1250 cause a rough idle?

Yes. Incorrect fuel pressure at idle causes rough idle, stalling, or hard starting, especially when cold.

Is the fuel pressure regulator hard to replace?

On most Ford vehicles, it is accessible on the fuel rail and is a moderate DIY job.

Explore More Codes

All codes | Browse by vehicle make