Shift Solenoid D Electrical
What does P0768 mean?
The P0768 code means the vehicle's onboard diagnostic system has detected: Shift Solenoid D Electrical. This is a moderate severity code.
Common Symptoms
- Check Engine Light illuminated
- Erratic shifting
- Possible limp mode
- Transmission may default to one gear
Probable Causes (Ranked by Likelihood)
- Open or short in shift solenoid D wiring Very High
- Failed solenoid D coil High
- Corroded transmission connector affecting solenoid D Moderate
- TCM solenoid D driver circuit failure Low
Step-by-Step Diagnostic Procedure
-
Measure solenoid D resistance at transmission connector
-
Check for voltage at solenoid when commanded on
-
Inspect transmission connector for corrosion
-
Check wiring continuity from TCM to solenoid D
-
Replace solenoid if coil is open or shorted
Frequently Asked Questions
Can I drive with code P0768?
Drive short distances only. Shift solenoid D electrical can cause the transmission to be stuck in the wrong gear or shift unpredictably.
What is shift solenoid D?
Shift solenoid D is an electro-hydraulic valve inside the transmission that controls fluid flow to engage specific gear combinations. It is commanded by the TCM to achieve proper shift timing.
Can I replace shift solenoid D without removing the transmission?
On most vehicles, shift solenoids are accessible by removing the transmission pan and sometimes the valve body. The transmission does not need to be removed from the vehicle.