Pressure Control Solenoid Malfunction
What does P0745 mean?
The P0745 code means the vehicle's onboard diagnostic system has detected: Pressure Control Solenoid Malfunction. This is a critical severity code.
Common Symptoms
- Check Engine Light illuminated
- Very harsh shifting
- Transmission slipping
- Limp mode activated
- Delayed gear engagement
Probable Causes (Ranked by Likelihood)
- Failed pressure control solenoid Very High
- Contaminated transmission fluid clogging solenoid High
- Wiring issue to pressure control solenoid Moderate
- TCM pressure control driver fault Low
Step-by-Step Diagnostic Procedure
-
Check transmission fluid condition -- contaminated fluid can clog the solenoid
-
Measure pressure control solenoid resistance
-
Perform a line pressure test in all gears
-
Check solenoid wiring and connector at the transmission
-
Replace the pressure control solenoid -- often requires dropping the valve body
Frequently Asked Questions
Can I drive with code P0745?
Do not drive -- have the vehicle towed. Pressure Control Solenoid Malfunction can cause severe transmission damage if ignored.
What is the most common fix for P0745?
The most common fix is replacing the affected solenoid. In some cases, a transmission fluid flush and solenoid replacement resolves the issue. Internal torque converter or valve body damage requires more extensive repair.
Can I replace the solenoid myself?
On some vehicles, shift solenoids are accessible by removing the transmission pan. On others, the valve body must be removed. This is a moderate to hard DIY job requiring transmission fluid drainage and careful reassembly.