Driver Seat Track Position Sensor Circuit
What does B0014 mean?
The B0014 code means the vehicle's onboard diagnostic system has detected: Driver Seat Track Position Sensor Circuit. This is a moderate severity code.
Common Symptoms
- Airbag warning light on
- Seat position not detected by SRS system
- Airbag deployment may not be optimized for seating position
- SRS fault code stored
- Warning chime intermittent
Probable Causes (Ranked by Likelihood)
- Failed driver seat track position sensor Very High
- Damaged wiring under driver seat High
- Corroded connector at seat track sensor Moderate
- Debris or obstruction in seat track Moderate
- SRS module not receiving seat position data Low
Step-by-Step Diagnostic Procedure
-
Scan SRS system for DTCs
-
Inspect seat track position sensor under driver seat
-
Check wiring harness under seat for damage
-
Clean seat track rails and sensor area
-
Test sensor output with scan tool live data
Frequently Asked Questions
Why does seat position matter for airbags?
The SRS system uses seat position data to adjust airbag deployment force. If the driver is very close to the steering wheel, the airbag may deploy with less force to prevent injury.
Can I drive with this code?
You can drive short distances, but the airbag system will not optimize deployment for your seating position. Have it repaired as soon as possible.
Is this related to the power seat motor?
No. The seat track position sensor is separate from the power seat motor. The sensor reports position to the SRS system, while the motor moves the seat.