Passenger Side Airbag Deployment Control
What does B0006 mean?
The B0006 code means the vehicle's onboard diagnostic system has detected: Passenger Side Airbag Deployment Control. This is a critical severity code.
Common Symptoms
- SRS warning light illuminated
- Passenger side airbag fault indicated
- Airbag malfunction message on display
- Warning chime sounds at ignition
- Failed safety inspection
Probable Causes (Ranked by Likelihood)
- Defective passenger side airbag module Very High
- Wiring damage under passenger seat High
- Loose or corroded seat harness connector Moderate
- SRS control module fault Moderate
- Previous accident with incomplete airbag repair Low
Step-by-Step Diagnostic Procedure
-
Read all SRS-related DTCs
-
Inspect passenger seat side airbag connector
-
Check wiring harness for damage or pinching under seat rails
-
Measure side airbag squib resistance
-
Verify SRS module is receiving proper signals
Frequently Asked Questions
Is the passenger side airbag the same as the frontal airbag?
No. The side airbag is in the seat bolster and deploys to protect the torso in a side impact, while the frontal airbag is in the dashboard and protects against frontal collisions.
Can items under the seat trigger this code?
Yes. Objects sliding under the passenger seat can damage or disconnect the wiring harness that runs from the seat to the body connector.
What happens if this airbag does not deploy?
In a side impact collision, the passenger would not have the additional protection of the side airbag, significantly increasing injury risk.