Driver Side Airbag Deployment Control
What does B0005 mean?
The B0005 code means the vehicle's onboard diagnostic system has detected: Driver Side Airbag Deployment Control. This is a critical severity code.
Common Symptoms
- Airbag warning light on
- SRS malfunction detected message
- Side airbag indicator fault
- Audible warning chime on startup
- Vehicle safety inspection failure
Probable Causes (Ranked by Likelihood)
- Defective driver side airbag module in seat Very High
- Damaged wiring under driver seat High
- Connector issue at seat-to-body harness Moderate
- Object lodged under seat interfering with wiring Moderate
- SRS control module failure Low
Step-by-Step Diagnostic Procedure
-
Scan for DTCs using SRS diagnostic tool
-
Inspect driver seat side airbag connector under seat
-
Check wiring harness from seat to body for chafing or breaks
-
Verify side airbag squib resistance values
-
Test SRS module communication with side airbag circuit
Frequently Asked Questions
Where is the driver side airbag located?
The driver side airbag is typically mounted in the outboard side of the driver seat backrest and deploys between the driver and the door in a side impact.
Can moving the seat cause this code?
Yes. Repeated seat adjustments can wear or pinch the wiring connector under the seat, causing intermittent faults in the side airbag circuit.
Is this a common problem?
Wiring damage under the driver seat is a common cause of side airbag codes, particularly in vehicles with power seats where the harness flexes frequently.